4630cc Motor System Pkgs
haralogo.gif (27511 bytes)  SPONSORING HARA #403 & LDRS 21 in 2002  haralogo.gif (27511 bytes)

Home          Products          Tech Notes          Launch Data      Hypertek 101       Hypertek Ready Rocket Kits        Order Form     Photo of the Month Contest     Service Bulletins

 0

300cc Motor System
440cc Motor System Pkg
835cc Motor System Pkgs
1685cc Motor System Pkgs
2800cc Motor System Pkgs
4630cc Motor System Pkgs
J Fuel Grain
J HyEFX Fuel Grain
L Fuel Grain
L HyEFX Fuel Grain
M Fuel Grain
M HyEFX Fuel Grain
Orifices
OXRAL E-Match
Ground Support Equipment  

4630cc Motor System "Armageddon M - 98mm" Package

The 4630cc Motor System "Armageddon M - 98mm" Package comes with 4360cc 98mm tank, injector bell, 1 standard M fuel grain, 1 HyEFX M fuel grain, tie straps, and motor adapter (fits over fuel grain to make 98mm and includes built in venting tube that vents out the bottom to eliminate cutting hole in airframe - PDF files below picture on this page) which give you the following engine combination:

M1000 with RG M orifice 
M1010FX with RG M orifice 



REQUIRED FOR LAUNCH:  Basic Fill/Fire Launch Control System (previously called GSE), M Fill Stem Assembly,  Remote Relay Module and 500' Control Cable

jthrum.jpg (48575 bytes)

All measurements below are estimates!  I will validate once I have the new motor systems in hand!

CLICK HERE TO SEE DIMENSIONS IN ADOBE ACROBAT READER 4.0 FILE!!!   CLICK REARVIEW, SIDEVIEW W/RETENTION PLATE, & SIDEVIEW W/O RETENTION PLATE FOR MOTOR ADAPTER DIMENSIONS!!! (Compliments of Cesaroni Technology Inc.)

4630cc motor is on top and is 4.375" in diameter and 27 3/4" long; take-off weight (includes motor system, fuel grain and N2O) approx N/A lbs; total length from top of motor system to fuel grain lip that fits against motor tube is approx 44 1/4".


4630cc 98mm motor (not shown) is 98mm in diameter and approx 36.28" long; total length from top of motor system to fuel grain lip that fits against motor tube is approx 52.78".