440cc Motor System Pkg
haralogo.gif (27511 bytes)  SPONSORING HARA #403 & LDRS 21 in 2002  haralogo.gif (27511 bytes)

Home          Products          Tech Notes          Launch Data      Hypertek 101       Hypertek Ready Rocket Kits        Order Form     Photo of the Month Contest     Service Bulletins

 

300cc Motor System
440cc Motor System Pkg
835cc Motor System Pkgs
1685cc Motor System Pkgs
2800cc Motor System Pkgs
4630cc Motor System Pkgs
J Fuel Grain
J HyEFX Fuel Grain
L Fuel Grain
L HyEFX Fuel Grain
M Fuel Grain
M HyEFX Fuel Grain
Orifices
OXRAL E-Match
Ground Support Equipment  

440cc Motor System "Standard J" Package

440cc Motor System Stainless Steel "Standard J" Package

The 440cc Motor System "Standard J" Package comes with 54mm tank, injector bell, 2 standard J fuel grains, 1 HyEFX J fuel grain, tie straps, and four orifices which give you the following engine combinations:

I260 with .172 orifice 

J295FX with .172 orifice 

J115 with .076 orifice 
J120FX with .076 orifice 
J170 with .098 orifice 
J190FX with .098 orifice 
J250 with .125 orifice 
J270FX with .125 orifice 

440cc Motor System Stainless Steel looks like the following:

1.InjBellSSfront.jpg (13690 bytes) 2. injbell1.jpg (16143 bytes)

1. View front                                    2.   Side view

3.injbell2.jpg (15259 bytes) 4.InjBellSSout.jpg (23818 bytes)

3.  Side view SS partially unscrewed              4. SS unscrewed all the way out

5.InjBellKline1.jpg (14459 bytes)

5. With SS unscrewed all the way out all you have to do is simply drop in kline valve o-ring and rescrew SS back in!  No more fiddling around trying to get the o-ring seated properly.

REQUIRED FOR LAUNCH:  Basic Fill/Fire Launch Control System (previously called GSE), J/L Fill Stem Assembly

jthrum.jpg (48575 bytes)

CLICK HERE TO SEE DIMENSIONS IN ADOBE ACROBAT READER 4.0 FILE!!!  (Compliments of Cesaroni Technology Inc.)

440cc is motor the bottom and is 2.125" (54mm) in diameter and 14.75" long (including injector bell); take-off weight (includes motor system, fuel grain and N2O) approx 2.9 lbs; total length from top of motor system to fuel grain lip that fits against motor tube is approx 24 5/16".